Start saving

more than 20% fuel
today.

IMG IMG

* Recommended by the European Automobile Manufacturers Association

When the fuel passes through the strong magnetic field its carbohydrate chains are being resolved into simpler components which are subsequently activated.

+XXXXXXXXXXX

  • Increase in the engine capacity up to 5 Hp


  • Reduction in consumption of fuel up to 20%

  • Reduction of CO and CH emissions up to 40% - 50%

  • The device has been certified

How does Magnufuel work?

img

Any kind of fuel, independently of where it is stored, constantly changes its substance because of the influence of temperature and humidity. Such influence extends and compresses fuel. The hydrocarbon molecules (a basis of any fuel) start to gravitate next to each other in а way that forms molecular groups - “clots of molecules”. The "clots" can not burn completely because part of them is out of reach of the oxygen zone. When the fuel passes through the zone where Magnufuel is installed, the magnetic-resonance frequency generated by the device dissipates the formed "clots" to individual molecules charging them positively. In this way the oxygen molecules penetrate into every molecule of the fuel, which helps complete burning of fuel-air mixture.

The result is lower fuel consumption and reduction of harmful emissions. The main part of the device Magnufuel is the neodymium magnet (NdFeB) consisting of two parts. Up to date, this effect can have only group of neodymium magnets made by special technology (USA Patent № 4.802.931, 4.496.395, 7.458.412, issued by the corporation of "General Motors“).

Magnets from other manufacturers (not to mention they are a cheap imitation) can not give such effect.


Installation


The installation doesn’t require any special skills. The most important part is not to make a mistake in selecting the hose. The device must be attached on the fuel hose.
• Open the hood of your car, find the fuel hose and choose a place where you want to install the device;
• Attach Magnufuel on the chosen place on the fuel hose. The hose should be between the two parts of the device.
• For more stability use the plastic collar which is included in the package. Note that the plastic collar passes through a small hole in the central channel of the device. Tighten it and if it is necessary cut off the extra piece of plastic collar;


+XXXXXXXXXXX

Main advantages


Easy to install. Installing the device takes just five minutes.

It does not generate any waste gas. This means that
considerably extends the life of the piston rings.

It also significantly extends the life of
the catalytic converter.

Confirmed efficiency.

Soon after installing Magnufuel there is much more
complete combustion.

No more «Check Engine» signaling, which responds mainly
to low fuel and incomplete combustion.

The amount spent on the purchase of Magnufuel returns for 1-2 months!

+XXXXXXXXXXX

FEEDBACK FROM OUR CUSTOMERS

Andrew Jackson 32 years

was/10L is/7L

Four days ago I installed Magnufuel on Hyundai Accent (2012). After the city I had a consumption of 10 liters, now 7-8. On the highway it’s 5.8 l per 100 km now. Yesterday I made the route London - Liverpool for 20 liters. Thanks to this small miracle.

Michael Lessig 46 years

was/9L is/7.5L

Dacia. The result came after the second refueling. The engine began to work more quiet, free from vibration and with increased performance. When I’m going for a small ride I’m saving from 1 to 1.5 liters. I am satisfied.

Magnufuel can be used on different types of transport

Cars

Trucks

Buses and vans

Motorboats and other water vehicles

Motorcycles

Agricultural machinery


Order Magnufuel

+XXXXXXXXXXX

IMG IMG

* Recommended by the European Automobile Manufacturers Association